Production Plan

Step	Procedure/Materials	Tools/Equipment	Risk	Time
The base  of the  Artefact	Piece of plywood to be cut into a certain size and wheels will be added at the bottom	Screwdriver,Saw,Screws	Wheels might keep falling from the wood	2 hrs
The bins	Illustration board to be cut into sides with a certain size and be made into a bin by assembling the sides. Tape will be used to assemble them.	Cutter,scissors,ruler	Sides may not be equal so bins may not fit perfectly on the sorter	1 hr
The walls (side,front, back)/ exterior	Illustration boards will be cut into specific sizes and these ‘walls’ will be assembled by sticking them to the base of course upwards like walls and painted with a design using poster paint and spray paint	Glue gun,cutter, paint brush,ruler	Walls may not be cut perfectly to their size so the design will look messy	2 days
The sorting mechanism/ interior	Illustration boards and chipboards will be cut into tracks and tubes. Also into stands/posts to hold stable the tracks since it’s elevated and one for the side wall(right) since it’s thin. Tape is used for assembly and for the stands.	Glue gun, cutter, ruler, scissors	Elevation might not be right and balls may not pass through smoothly as we have planned	3 days
Roof of  our design	Illustration board will be cut into a certain size and be put on top of the walls. Also a hole will be cut on one corner to have an entrance for the balls if going to sort	Cutter, ruler, Glue gun	Walls may not be stable enough to hold up the roof and the roof may not be cut to its certain size accordingly	30 mins